MED Connector

The MED Connector holds and connects the MED Probe (MEA) to the amplifiers. Thanks to the MED Probe’s lowest-impedance electrodes the MED Connector holding the MED Probe is connected to the amplifier with 2m-long cable, that does not generate signal attenuation. This unique MED64 system configuration will provide the great flexibilities for your experiments.

For Basic / Plex System

Products_Connector

Features

  • No active onboard electrical circuitry; Connectors can safely be placed in a humidified environment (e.g. cell culture incubator).
  • Provides clear optical path through MED Probe for microscopy.
  • Provides a mechanically-stable platform for the MED Probe.

 

For Basic / Plex System

MED Heated Connector
(MED-CP02H)

hero_med64_connector_heated

Features

  • Heater and thermocouple sensor are incorporated into the MED Connector.
  • Bath temperature in the MED Probe is maintained using a ThermoClamp™-1 controller manufactured by AutoMate Scientific Inc.
  • Can be used with or without perfusion. Included tubing through connector provides in-line solution heating.

 

For Quad II System

MED Mini Connector
(MED-C04)

hero_med64_connector_miniiii

Features

  •  Connector for the MED64-Quad II System.
  • Used for communication between the MED Probe 16 and the MED64 Head Amplifier.
  • No active onboard electrical circuitry; Connectors can safely be placed in a humidified environment (e.g. cell culture incubator).
  • Compact design.
  • Easy-to-load the MED Probe.

 

For Allegro System

 

MED Multi-well Connector
(MED-C11)

Connector_MultiWell_450x450

Features

  • Connector for the MED64-Allegro System.
  • Used for communication between the MED Multi-well Probe and the MED64 Head Amplifier.
  • No active onboard electrical circuitry; Connectors can safely be placed in a humidified environment (e.g. cell culture incubator).
  • Compact design.
  • Easy–to-load the MED Probe.